- Robust construction
- Ideal for laboratory and manufacturing
- Can be equipped with lamps of different wavelengths
- High radiation intensity with low heat generation
- Lamp control
- Environmentally friendly disinfection without chemicals
UV-Chambers M-Series
From surface disinfection to light polymerization – UV chambers can be used in many ways
The M-series units are perfectly suited for the laboratory or a small production. They differ primarily in dimensions, therefore suitable for different batch sizes.
The units are equipped with an electronic timer from 0 – 999h, as well as an operating hours counter.
UV-Chambers M-Series
From surface disinfection to light polymerization – UV chambers can be used in many ways
The M-series units are perfectly suited for the laboratory or a small production. They differ primarily in dimensions, therefore suitable for different batch sizes.
The units are equipped with an electronic timer from 0 – 999h, as well as an operating hours counter.
- Robust construction
- Ideal for laboratory and manufacturing
- Can be equipped with lamps of different wavelengths
- High radiation intensity with low heat generation
- Lamp control
- Environmentally friendly disinfection without chemicals
UV-Chamber M1
UV-Chamber M2
UV-Chamber M3
UV-Chamber M4
UV-Chambers M-Series
DINIES UV chambers can be equipped with UV lamps of different wavelengths, which makes the devices very flexible and suitable for a wide range of applications.
The operating temperature is max. 40°C for a short start-up and approx. 50°C for a longer operating time. Thus, in contrast to medium or high-pressure emitters, where temperatures of up to 800°C can be reached, even temperature-sensitive materials can be brought very close to the emitters.
This considerably increases the UV intensity on the surface of the parts and thus shortens the processing time. The irradiation time is set by means of an electronic (999h) timer. The materials are easily and safely placed under the UV lamps by means of a smooth-running drawer.
For safety reasons, the lamps are switched off when the drawer is opened, but switch on again when it is closed.
Areas of application
- Laboratories
- Industry
- Small productions
- Electronics assembly
Fields of application
- Light polymerization
- Disinfection of surfaces (UVC lamp)
- Curing of adhesives, varnishes, resins, inks (UV lamp according to application)
- Material testing (UV lamp according to application)
- Aging tests
- Erasing of EPROM’s (UVC lamp)
- Mold stains on stamps (UV/ozone combination)
Technical Data
M1 | M2 | M3 | M4 | |
---|---|---|---|---|
Rated voltage | 230 V, 50/60 Hz | 230 V, 50/60 Hz | 230 V, 50/60 Hz | 230 V, 50/60 Hz |
Rated power | 100 W | 200 W | 300 W | 450 W |
Dimensions (L x W x H) | 255 x 225 x 160 mm | 255 x 425 x 160 mm | 465 x 425 x 160 mm | 649 x 468 x 160 mm |
UV-C power (254 nm) | 18 mW/cm² | 18 mW/cm² | 18 mW/cm² | 18 mW/cm² |
UV-B power (320 nm) | / | / | 6 mW/cm² | / |
UV-A power(365 nm) | 7 mW/cm² | 7 mW/cm² | 8 mW/cm² | / |
Irradiation area | 195 x 220 mm | 395 x 220 mm | 395 x 420 mm | 619 x 430 mm |
Volume | Almost silent | Almost silent | Almost silent | Almost silent |
Assembly | Mobile device | Mobile device | Mobile device | Mobile device |